Please use this identifier to cite or link to this item: https://ir.sc.mahidol.ac.th/handle/123456789/582
Title: All inkjet-printed chemical gas sensors based on CNT/polymer nanocomposites: Comparison between double printed layers and blended single layer
Authors: Teerakiat Kerdcharoen
Keywords: gas sensor;inkjet printing;polymer/CNT composite;printed electronics
Issue Date: 2012
Publisher: 2012 9th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2012
Citation: ฟิสิกส์
Series/Report no.: ;Article number 6254171
Abstract: Gas sensors based on carbon nanotube (CNT)/ polymer nanocomposite were fabricated by a fully inkjet-printing method. The CNT/polymer layers acting as sensing layer were prepared by 2 methods; (i) deposition of separated layer of CNT and polymer to form a composite-like structure at the interface and (ii) deposition of blend CNT and polymer to obtain completely composite layer. Difference of sensor responses was demonstrated. We have found that the sensor with a compositelike layer provides a good response to volatile organic compounds (VOCs) as compared to the sensor obtained from printing CNT/polymer composite. The results have also demonstrated that the capability of the CNT/polymer composite sensor allows detecting VOCs in broad range of concentration.
Description: Scopus
URI: https://ir.sc.mahidol.ac.th/handle/123456789/582
ISSN: 978-146732024-5
Appears in Collections:Physics: International Proceedings

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.